THRUST WINDSURF FOIL COMPLETE-STANDARD
All-around Freeride Foil
Mast Size: 70 cm |Aspect Ratio: 3.46 | Wingspan: 65 cm | Projected Surface Area: 1220 cm2
While forgiving for those just getting started, the Thrust Windsurf
foil setup also offers boundless potential for those looking to advance
their skills. 50% lighter than its 2018 counterpart, the 2019 delta
shaped front wing creates lift at very low speeds and maintains
stability through both for-and-aft as well as side-to-side movements.
Compared to high aspect wing shapes, this delta is incredibly
user-friendly and delivers earlier lift. Whether it’s blowing under 10
knots or if the wind is hitting the high 20s, this wing is ready for the
ride. Conversely, in the same conditions, riders on high aspect wings
are forced to switch to a smaller wing set, since their lightwind wing
sets would no longer be controllable.
Easy jibing and other
maneuvers are another advantage of the Thrust WS setup. The delta front
wing works in tandem with the vertical stabilizer of the back wing to
deliver easy control when turning. The front wing provides lift at low
speeds making it much easier to cruise through a jibe without coming off
the foil. While high aspect foils require the board to plane first, the
Thrust WS setup engages the foil, lifting you up even when the board
has not reached full planing.
The Thrust Windsurf foil setup
offers the earliest foiling in the lightest winds, maximum control at
any wind speed—in comparison to high aspect foils—and accessible
maneuverability in jibes and tacks. Its unique design, not only welcomes
new riders to the sport, it supports you through the journey as you
advance your skill level.
View the Assembly Instructions HERE
Hover Kite 130, 155, and 160 foilboards have a shallower track system
and therefore require the shorter screws as supplied with the board.
These boards CANNOT be used with the longer screws that come with the
Naish Thrust foil.
When pairing all other Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil.
Reference which screws to use HERE
- 50% Lighter Wings
- Back Wing
- Monocoque Ultra Robust Back Wing Construction
- Heavy-duty Fuselage
- Standard Plate Connection
- Stealth Stripes
- Aircraft Grade High Precision CNC Cut Fuselage
- Aircraft Grade Extruded Aluminum Mast
(All aluminum masts will receive a custom wet-sanded Speed Finish)
- Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction
- Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction
- 316 Marine Grade Stainless Steel Hardware
COMPLETE KIT INCLUDES
- Front Wing WS 1
- Back Wing WS 2
- 70 cm Aluminum Mast BOARD MOUNT SOLD SEPARATELY
- Fuselage WS
- Foil Assembly Screw Set
- Standard Mount Plate
- Standard Plate Screw Set
- Foil Cover